What are the prices for wood lath installation in Woodway TX?

Home Remodeling & Home Services Cost Estimates

square feet

ITEM	QUANTITY	LOW	HIGH
Wood Lath Cost Non-discounted retail cost for common, mid-grade wood lath. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	215 square feet	$88.64	$112.19
Wood Lath Labor Direct labor expenses to install gypsum lath.	3 hours	$196.20	$197.99
Wood Lath Job Materials and Supplies Cost of supplies that may be required to install gypsum lath including: fasteners, seam tape and top compound.	200 square feet	$43.07	$46.64
Wood Lath Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: manual drywall hoist for drywall up to 4' x 16'..		$25.46	$36.38
Total Cost to Install Gypsum Lathes	215 square feet	$353.37	$393.19
	Average cost per square foot	$1.77	$1.97

This is an estimate. You can get an accurate quote for your project from a Woodway drywall pro.

Get a FREE Quote

Cost to Install Gypsum Lathes - 2025 Cost Calculator

To Install Gypsum Lathes in Woodway you should expect to pay in the range of $353.37 to $393.19. What we use to calculate Woodway Wood Lath Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Wood Lath Installation in Woodway project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per square foot for Wood Lath Installation in Woodway

The average cost to Install Gypsum Lathes in Woodway 2025 is $1.77 to $1.97 per square foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Woodway Wood Lath Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Wood Lath Installation in Woodway

Non-discounted retail costs for 215 square feet of Wood Lath Installation - between $88.64 and $112.19.
Direct labor costs to Install Gypsum Lathes in Woodway - between $196.20 and $197.99.
Cost of all materials and supplies which may be necessary for Wood Lath Installation , which may include: - between $43.07 and $46.64.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $25.46 and $36.38.

What the Woodway Wood Lath Installation Estimate Includes:

Costs associated with worksite preparation for the Wood Lath Installation in Woodway project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Woodway materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Wood Lath Installation projects.

What the Wood Lath Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Woodway building department.
Texas and Woodway sales taxes on supplies and materials.
Any general contractor fees for supervision of the Woodway Wood Lath Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.