What are the costs for ashlar stone installation in High Bridge NJ?

Home Remodeling & Home Services Cost Estimates

tons

ITEM	QUANTITY	LOW	HIGH
Ashlar Stone Cost Non-discounted retail cost for common, mid-grade ashlar stone. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	2 ton	$3.25	$4.05
Ashlar Stone Labor Direct labor expenses to install ashlar stone.	2 hours	$15.25	$132.54
Ashlar Stone Job Materials and Supplies Cost of supplies that may be required to install ashlar stone including: soil amendments and planting fertilizers.	1 ton	$0.40	$14.55
Ashlar Stone Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: 100 # wheelbarrow, shovels and landscapers spreading rakes.		$32.74	$45.83
Total Cost to Install Ashlar Stones	2 ton	$51.62	$196.98
	Average cost per ton	$51.62	$196.98

This is an estimate. You can get an accurate quote for your project from a High Bridge landscaping pro.

Get a FREE Quote

Cost to Install Ashlar Stones - 2025 Cost Calculator

To Install Ashlar Stones in High Bridge you should expect to pay in the range of $51.62 to $196.98. What we use to calculate High Bridge Ashlar Stone Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Ashlar Stone Installation in High Bridge project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per ton for Ashlar Stone Installation in High Bridge

The average cost to Install Ashlar Stones in High Bridge 2025 is $51.62 to $196.98 per ton. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on High Bridge Ashlar Stone Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Ashlar Stone Installation in High Bridge

Non-discounted retail costs for 2 ton of Ashlar Stone Installation - between $3.25 and $4.05.
Direct labor costs to Install Ashlar Stones in High Bridge - between $15.25 and $132.54.
Cost of all materials and supplies which may be necessary for Ashlar Stone Installation , which may include: - between $0.40 and $14.55.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $32.74 and $45.83.

What the High Bridge Ashlar Stone Installation Estimate Includes:

Costs associated with worksite preparation for the Ashlar Stone Installation in High Bridge project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local High Bridge materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Ashlar Stone Installation projects.

What the Ashlar Stone Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the High Bridge building department.
New Jersey and High Bridge sales taxes on supplies and materials.
Any general contractor fees for supervision of the High Bridge Ashlar Stone Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.