What are the costs for trim molding installation in Kress TX?

Home Remodeling & Home Services Cost Estimates

linear feet

ITEM	QUANTITY	LOW	HIGH
Molding Cost Non-discounted retail cost for common, mid-grade molding. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	54 linear feet	$43.43	$121.22
Molding Labor Direct labor expenses to install trim molding.	2.8 hours	$68.91	$129.42
Molding Job Materials and Supplies Cost of supplies that may be required to install trim molding including: fasteners, connectors, surface preparation and finishing materials.	50 linear feet	$35.57	$38.52
Molding Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: pneumatic finish nailer, 12" compound miter saw, biscuit joiner, detail sander.		$61.84	$83.66
Total Cost to Install Trim Molding	54 linear feet	$209.74	$372.82
	Average cost per linear foot	$4.19	$7.46

This is an estimate. You can get an accurate quote for your project from a Kress carpentry pro.

Get a FREE Quote

Cost to Install Trim Molding - 2025 Cost Calculator

To Install Trim Molding in Kress you should expect to pay in the range of $209.74 to $372.82. What we use to calculate Kress Trim Molding Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Trim Molding Installation in Kress project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per linear foot for Trim Molding Installation in Kress

The average cost to Install Trim Molding in Kress 2025 is $4.19 to $7.46 per linear foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Kress Trim Molding Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Trim Molding Installation in Kress

Non-discounted retail costs for 54 linear feet of Trim Molding Installation - between $43.43 and $121.22.
Direct labor costs to Install Trim Molding in Kress - between $68.91 and $129.42.
Cost of all materials and supplies which may be necessary for Trim Molding Installation , which may include: - between $35.57 and $38.52.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $61.84 and $83.66.

What the Kress Trim Molding Installation Estimate Includes:

Costs associated with worksite preparation for the Trim Molding Installation in Kress project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Kress materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Trim Molding Installation projects.

What the Trim Molding Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Kress building department.
Texas and Kress sales taxes on supplies and materials.
Any general contractor fees for supervision of the Kress Trim Molding Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.