What are the costs for travertine paver installation in Naval Air Station/ Jrb TX?

Home Remodeling & Home Services Cost Estimates

square feet

ITEM	QUANTITY	LOW	HIGH
Travertine Pavers Cost Non-discounted retail cost for common, mid-grade travertine pavers. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	215 square feet	$776.50	$974.93
Travertine Pavers Labor Direct labor expenses to install travertine pavers.	27.1 hours	$1,277.59	$1,537.39
Travertine Pavers Job Materials and Supplies Cost of supplies that may be required to install travertine pavers including: cutting and grinding materials, mortar and reinforcement.	200 square feet	$79.56	$86.16
Travertine Pavers Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: 115 v wet masonry saw, 5 cubic foot mortar box and small plate compactor.		$54.56	$76.39
Total Cost to Install Travertine Pavers	215 square feet	$2,188.21	$2,674.86
	Average cost per square foot	$10.94	$13.38

This is an estimate. You can get an accurate quote for your project from a Naval Air Station/ Jrb concrete and masonry pro.

Get a FREE Quote

Cost to Install Travertine Pavers - 2025 Cost Calculator

To Install Travertine Pavers in Naval Air Station/ Jrb you should expect to pay in the range of $2,188.21 to $2,674.86. What we use to calculate Naval Air Station/ Jrb Travertine Paver Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Travertine Paver Installation in Naval Air Station/ Jrb project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per square foot for Travertine Paver Installation in Naval Air Station/ Jrb

The average cost to Install Travertine Pavers in Naval Air Station/ Jrb 2025 is $10.94 to $13.38 per square foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Naval Air Station/ Jrb Travertine Paver Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Travertine Paver Installation in Naval Air Station/ Jrb

Non-discounted retail costs for 215 square feet of Travertine Paver Installation - between $776.50 and $974.93.
Direct labor costs to Install Travertine Pavers in Naval Air Station/ Jrb - between $1,277.59 and $1,537.39.
Cost of all materials and supplies which may be necessary for Travertine Paver Installation , which may include: - between $79.56 and $86.16.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $54.56 and $76.39.

What the Naval Air Station/ Jrb Travertine Paver Installation Estimate Includes:

Costs associated with worksite preparation for the Travertine Paver Installation in Naval Air Station/ Jrb project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Naval Air Station/ Jrb materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Travertine Paver Installation projects.

What the Travertine Paver Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Naval Air Station/ Jrb building department.
Texas and Naval Air Station/ Jrb sales taxes on supplies and materials.
Any general contractor fees for supervision of the Naval Air Station/ Jrb Travertine Paver Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.