What is the cost for paving brick in sand installation in Kilbourne IL?

Home Remodeling & Home Services Cost Estimates

square feet

ITEM	QUANTITY	LOW	HIGH
Brick Paving Cost Non-discounted retail cost for common, mid-grade brick paving. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	215 square feet	$605.55	$739.64
Brick Paving Labor Direct labor expenses to install paving bricks in sand.	24.3 hours	$1,300.29	$1,552.45
Brick Paving Job Materials and Supplies Cost of supplies that may be required to install paving bricks in sand including: cutting and grinding materials, mortar and reinforcement.	200 square feet	$146.96	$159.14
Brick Paving Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: 115 v wet masonry saw, 5 cubic foot mortar box and small plate compactor.		$54.56	$76.39
Total Cost to Install Paving Bricks In Sand	215 square feet	$2,107.35	$2,527.62
	Average cost per square foot	$10.53	$12.64

This is an estimate. You can get an accurate quote for your project from a Kilbourne concrete and masonry pro.

Get a FREE Quote

Cost to Install Paving Bricks In Sand - 2025 Cost Calculator

To Install Paving Bricks In Sand in Kilbourne you should expect to pay in the range of $2,107.35 to $2,527.62. What we use to calculate Kilbourne Paving Brick In Sand Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Paving Brick In Sand Installation in Kilbourne project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per square foot for Paving Brick In Sand Installation in Kilbourne

The average cost to Install Paving Bricks In Sand in Kilbourne 2025 is $10.53 to $12.64 per square foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Kilbourne Paving Brick In Sand Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Paving Brick In Sand Installation in Kilbourne

Non-discounted retail costs for 215 square feet of Brick Paving In Sand Installation - between $605.55 and $739.64.
Direct labor costs to Install Paving Bricks In Sand in Kilbourne - between $1,300.29 and $1,552.45.
Cost of all materials and supplies which may be necessary for Paving Brick In Sand Installation , which may include: - between $146.96 and $159.14.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $54.56 and $76.39.

What the Kilbourne Brick Paving In Sand Installation Estimate Includes:

Costs associated with worksite preparation for the Paving Brick In Sand Installation in Kilbourne project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Kilbourne materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Paving Brick In Sand Installation projects.

What the Brick Paving In Sand Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Kilbourne building department.
Illinois and Kilbourne sales taxes on supplies and materials.
Any general contractor fees for supervision of the Kilbourne Paving Brick In Sand Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.