What is the cost for base molding installation in O Fallon IL?

Home Remodeling & Home Services Cost Estimates

linear feet

ITEM	QUANTITY	LOW	HIGH
Base Cost Non-discounted retail cost for common, mid-grade base. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	54 linear feet	$60.95	$124.07
Base Labor Direct labor expenses to install base molding.	3 hours	$95.82	$178.85
Base Job Materials and Supplies Cost of supplies that may be required to install base molding including: fasteners, connectors, surface preparation and finishing materials.	50 linear feet	$19.40	$24.25
Base Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: pneumatic finish nailer, 12" compound miter saw, biscuit joiner, detail sander.		$61.84	$83.66
Total Cost to Install Base Molding	54 linear feet	$237.99	$410.83
	Average cost per linear foot	$4.76	$8.22

This is an estimate. You can get an accurate quote for your project from a O Fallon carpentry pro.

Get a FREE Quote

Cost to Install Base Molding - 2025 Cost Calculator

To Install Base Molding in O Fallon you should expect to pay in the range of $237.99 to $410.83. What we use to calculate O Fallon Base Molding Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Base Molding Installation in O Fallon project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per linear foot for Base Molding Installation in O Fallon

The average cost to Install Base Molding in O Fallon 2025 is $4.76 to $8.22 per linear foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on O Fallon Base Molding Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Base Molding Installation in O Fallon

Non-discounted retail costs for 54 linear feet of Base Molding Installation - between $60.95 and $124.07.
Direct labor costs to Install Base Molding in O Fallon - between $95.82 and $178.85.
Cost of all materials and supplies which may be necessary for Base Molding Installation , which may include: - between $19.40 and $24.25.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $61.84 and $83.66.

What the O Fallon Base Molding Installation Estimate Includes:

Costs associated with worksite preparation for the Base Molding Installation in O Fallon project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local O Fallon materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Base Molding Installation projects.

What the Base Molding Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the O Fallon building department.
Illinois and O Fallon sales taxes on supplies and materials.
Any general contractor fees for supervision of the O Fallon Base Molding Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.