What is the cost for surface sealing in Kewanee IL?

Home Remodeling & Home Services Cost Estimates

square feet

ITEM	QUANTITY	LOW	HIGH
Deck Labor Direct labor expenses to seal surface.	8.9 hours	$268.97	$511.84
Deck Job Materials and Supplies Cost of supplies that may be required to seal surface including: masking tape and paper, surface repair material, solvents and cleanup supplies.	200 square feet	$29.02	$38.80
Total Cost to Seal Surfaces	215 square feet	$297.99	$550.64
	Average cost per square foot	$1.49	$2.75

This is an estimate. You can get an accurate quote for your project from a Kewanee concrete and masonry pro.

Get a FREE Quote

Cost to Seal Surfaces - 2026 Cost Calculator

To Seal Surfaces in Kewanee you should expect to pay in the range of $297.99 to $550.64. What we use to calculate Kewanee Surface Sealing estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Surface Sealing in Kewanee project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per square foot for Surface Sealing in Kewanee

The average cost to Seal Surfaces in Kewanee 2026 is $1.49 to $2.75 per square foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Kewanee Surface Sealing projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Surface Sealing in Kewanee

Direct labor costs to Seal Surfaces in Kewanee - between $268.97 and $511.84.
Cost of all materials and supplies which may be necessary for Surface Sealing , which may include: - between $29.02 and $38.80.

What the Kewanee Surface Sealing Estimate Includes:

Costs associated with worksite preparation for the Surface Sealing in Kewanee project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Kewanee materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Surface Sealing projects.

What the Surface Sealing Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Kewanee building department.
Illinois and Kewanee sales taxes on supplies and materials.
Any general contractor fees for supervision of the Kewanee Surface Sealing project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.