What are the costs for stone surface repair in Ira TX?

Home Remodeling & Home Services Cost Estimates

repairs

ITEM	QUANTITY	LOW	HIGH
Stone Repair Labor Direct labor expenses to repair stone.	3 hours	$77.59	$146.66
Stone Repair Job Materials and Supplies Cost of supplies that may be required to repair stone including: fabrication and polishing disposables, manufacturer recommended underlayment, fasteners, adhesives and surface sealants.	1 repair	$38.80	$38.80
Stone Repair Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: 10" diameter diamond wet tile and stone saw for tiles up to 14".		$32.74	$54.56
Total Cost to Repair Stone Surfaces	1 repair	$149.13	$240.03
	Average cost per repair	$149.13	$240.03

This is an estimate. You can get an accurate quote for your project from a Ira concrete and masonry pro.

Get a FREE Quote

Cost to Repair Stone Surfaces - 2025 Cost Calculator

To Repair Stone Surfaces in Ira you should expect to pay in the range of $149.13 to $240.03. What we use to calculate Ira Stone Surface Repair estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Stone Surface Repair in Ira project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per repair for Stone Surface Repair in Ira

The average cost to Repair Stone Surfaces in Ira 2025 is $149.13 to $240.03 per repair. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Ira Stone Surface Repair projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Stone Surface Repair in Ira

Direct labor costs to Repair Stone Surfaces in Ira - between $77.59 and $146.66.
Cost of all materials and supplies which may be necessary for Stone Surface Repair , which may include: - between $38.80 and $38.80.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $32.74 and $54.56.

What the Ira Stone Surface Repair Estimate Includes:

Costs associated with worksite preparation for the Stone Surface Repair in Ira project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Ira materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Stone Surface Repair projects.

What the Stone Surface Repair Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Ira building department.
Texas and Ira sales taxes on supplies and materials.
Any general contractor fees for supervision of the Ira Stone Surface Repair project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.