What are the prices for wood lath installation in Rawlins WY?

Home Remodeling & Home Services Cost Estimates

square feet

ITEM	QUANTITY	LOW	HIGH
Wood Lath Cost Non-discounted retail cost for common, mid-grade wood lath. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	215 square feet	$88.64	$112.19
Wood Lath Labor Direct labor expenses to install gypsum lath.	3 hours	$221.34	$223.37
Wood Lath Job Materials and Supplies Cost of supplies that may be required to install gypsum lath including: fasteners, seam tape and top compound.	200 square feet	$43.07	$46.64
Wood Lath Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: manual drywall hoist for drywall up to 4' x 16'..		$25.46	$36.38
Total Cost to Install Gypsum Lathes	215 square feet	$378.51	$418.57
	Average cost per square foot	$1.89	$2.10

This is an estimate. You can get an accurate quote for your project from a Rawlins drywall pro.

Get a FREE Quote

Cost to Install Gypsum Lathes - 2026 Cost Calculator

To Install Gypsum Lathes in Rawlins you should expect to pay in the range of $378.51 to $418.57. What we use to calculate Rawlins Wood Lath Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Wood Lath Installation in Rawlins project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per square foot for Wood Lath Installation in Rawlins

The average cost to Install Gypsum Lathes in Rawlins 2026 is $1.89 to $2.10 per square foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Rawlins Wood Lath Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Wood Lath Installation in Rawlins

Non-discounted retail costs for 215 square feet of Wood Lath Installation - between $88.64 and $112.19.
Direct labor costs to Install Gypsum Lathes in Rawlins - between $221.34 and $223.37.
Cost of all materials and supplies which may be necessary for Wood Lath Installation , which may include: - between $43.07 and $46.64.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $25.46 and $36.38.

What the Rawlins Wood Lath Installation Estimate Includes:

Costs associated with worksite preparation for the Wood Lath Installation in Rawlins project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Rawlins materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Wood Lath Installation projects.

What the Wood Lath Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Rawlins building department.
Wyoming and Rawlins sales taxes on supplies and materials.
Any general contractor fees for supervision of the Rawlins Wood Lath Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.