What are the costs for split face block installation in Crownsville MD?

Home Remodeling & Home Services Cost Estimates

square feet

ITEM	QUANTITY	LOW	HIGH
Block Wall Cost Non-discounted retail cost for common, mid-grade block wall. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	215 square feet	$566.40	$720.44
Block Wall Labor Direct labor expenses to install split face block.	24.3 hours	$1,270.45	$1,510.64
Block Wall Job Materials and Supplies Cost of supplies that may be required to install split face block including: cutting and grinding materials, mortar and reinforcement.	200 square feet	$70.21	$76.03
Block Wall Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: 115 v wet masonry saw, 5 cubic foot mortar box and small plate compactor.		$54.56	$76.39
Total Cost to Install Split Face Blocks	215 square feet	$1,961.62	$2,383.49
	Average cost per square foot	$9.81	$11.92

This is an estimate. You can get an accurate quote for your project from a Crownsville walls pro.

Get a FREE Quote

Cost to Install Split Face Blocks - 2026 Cost Calculator

To Install Split Face Blocks in Crownsville you should expect to pay in the range of $1,961.62 to $2,383.49. What we use to calculate Crownsville Split Face Block Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Split Face Block Installation in Crownsville project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per square foot for Split Face Block Installation in Crownsville

The average cost to Install Split Face Blocks in Crownsville 2026 is $9.81 to $11.92 per square foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Crownsville Split Face Block Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Split Face Block Installation in Crownsville

Non-discounted retail costs for 215 square feet of Block Wall Installation - between $566.40 and $720.44.
Direct labor costs to Install Split Face Blocks in Crownsville - between $1,270.45 and $1,510.64.
Cost of all materials and supplies which may be necessary for Split Face Block Installation , which may include: - between $70.21 and $76.03.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $54.56 and $76.39.

What the Crownsville Block Wall Installation Estimate Includes:

Costs associated with worksite preparation for the Split Face Block Installation in Crownsville project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Crownsville materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Split Face Block Installation projects.

What the Block Wall Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Crownsville building department.
Maryland and Crownsville sales taxes on supplies and materials.
Any general contractor fees for supervision of the Crownsville Split Face Block Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.