What are the costs for molding installation in Round O SC?

Home Remodeling & Home Services Cost Estimates

linear feet

ITEM	QUANTITY	LOW	HIGH
Molding Cost Non-discounted retail cost for common, mid-grade molding. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	54 linear feet	$43.43	$121.22
Molding Labor Direct labor expenses to install molding.	2.8 hours	$67.97	$127.66
Molding Job Materials and Supplies Cost of supplies that may be required to install molding including: fasteners, connectors, surface preparation and finishing materials.	50 linear feet	$19.40	$24.25
Molding Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: pneumatic finish nailer, 12" compound miter saw, biscuit joiner, detail sander.		$61.84	$83.66
Total Cost to Install Molding	54 linear feet	$192.63	$356.80
	Average cost per linear foot	$3.85	$7.14

This is an estimate. You can get an accurate quote for your project from a Round O carpentry pro.

Get a FREE Quote

Cost to Install Molding - 2026 Cost Calculator

To Install Molding in Round O you should expect to pay in the range of $192.63 to $356.80. What we use to calculate Round O Molding Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Molding Installation in Round O project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per linear foot for Molding Installation in Round O

The average cost to Install Molding in Round O 2026 is $3.85 to $7.14 per linear foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Round O Molding Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Molding Installation in Round O

Non-discounted retail costs for 54 linear feet of Molding Installation - between $43.43 and $121.22.
Direct labor costs to Install Molding in Round O - between $67.97 and $127.66.
Cost of all materials and supplies which may be necessary for Molding Installation , which may include: - between $19.40 and $24.25.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $61.84 and $83.66.

What the Round O Molding Installation Estimate Includes:

Costs associated with worksite preparation for the Molding Installation in Round O project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Round O materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Molding Installation projects.

What the Molding Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Round O building department.
South Carolina and Round O sales taxes on supplies and materials.
Any general contractor fees for supervision of the Round O Molding Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.