What does aggregate concrete driveway installation cost in Holcomb MO?

square feet

ITEM	QUANTITY	LOW	HIGH
Driveway Cost Non-discounted retail cost for common, mid-grade driveway. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	215 square feet	$299.77	$331.49
Driveway Labor Direct labor expenses to install exposed aggregate driveway.	8.1 hours	$381.36	$397.89
Driveway Job Materials and Supplies Cost of supplies that may be required to install exposed aggregate driveway including: reinforcing materials, isolation materials, cleaning and chemical release agents .	200 square feet	$17.79	$24.25
Driveway Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: 48" bull float, reinforcing bar cutters, 5+ cubic foot mortar mixing box with mortar hoe.		$58.20	$103.31
Total Cost to Install Exposed Aggregate Driveways	215 square feet	$757.11	$856.94
	Average cost per square foot	$3.78	$4.29

This is an estimate. You can get an accurate quote for your project from a Holcomb concrete and masonry pro.

Get a FREE Quote

Cost to Install Exposed Aggregate Driveways - 2025 Cost Calculator

To Install Exposed Aggregate Driveways in Holcomb you should expect to pay in the range of $757.11 to $856.94. What we use to calculate Holcomb Aggregate Concrete Driveway Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Aggregate Concrete Driveway Installation in Holcomb project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per square foot for Aggregate Concrete Driveway Installation in Holcomb

The average cost to Install Exposed Aggregate Driveways in Holcomb 2025 is $3.78 to $4.29 per square foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Holcomb Aggregate Concrete Driveway Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Aggregate Concrete Driveway Installation in Holcomb

Non-discounted retail costs for 215 square feet of Driveway Installation - between $299.77 and $331.49.
Direct labor costs to Install Exposed Aggregate Driveways in Holcomb - between $381.36 and $397.89.
Cost of all materials and supplies which may be necessary for Aggregate Concrete Driveway Installation , which may include: - between $17.79 and $24.25.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $58.20 and $103.31.

What the Holcomb Driveway Installation Estimate Includes:

Costs associated with worksite preparation for the Aggregate Concrete Driveway Installation in Holcomb project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Holcomb materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Aggregate Concrete Driveway Installation projects.

What the Driveway Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Holcomb building department.
Missouri and Holcomb sales taxes on supplies and materials.
Any general contractor fees for supervision of the Holcomb Aggregate Concrete Driveway Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.

What are the prices for aggregate concrete driveway installation in Holcomb MO?