What are the prices for slate chip installation in Ellington MO?

Home Remodeling & Home Services Cost Estimates

square feet

ITEM	QUANTITY	LOW	HIGH
Slate Chips Cost Non-discounted retail cost for common, mid-grade slate chips. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	215 square feet	$132.00	$154.46
Slate Chips Labor Direct labor expenses to install slate chips.	2.5 hours	$27.57	$141.06
Slate Chips Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: 100 # wheelbarrow, shovels and landscapers spreading rakes.		$32.74	$45.83
Total Cost to Install Slate Chips	215 square feet	$192.30	$341.35
	Average cost per square foot	$0.96	$1.71

This is an estimate. You can get an accurate quote for your project from a Ellington landscaping pro.

Get a FREE Quote

Cost to Install Slate Chips - 2026 Cost Calculator

To Install Slate Chips in Ellington you should expect to pay in the range of $192.30 to $341.35. What we use to calculate Ellington Slate Chip Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Slate Chip Installation in Ellington project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per square foot for Slate Chip Installation in Ellington

The average cost to Install Slate Chips in Ellington 2026 is $0.96 to $1.71 per square foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Ellington Slate Chip Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Slate Chip Installation in Ellington

Non-discounted retail costs for 215 square feet of Slate Chip Installation - between $132.00 and $154.46.
Direct labor costs to Install Slate Chips in Ellington - between $27.57 and $141.06.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $32.74 and $45.83.

What the Ellington Slate Chip Installation Estimate Includes:

Costs associated with worksite preparation for the Slate Chip Installation in Ellington project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Ellington materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Slate Chip Installation projects.

What the Slate Chip Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Ellington building department.
Missouri and Ellington sales taxes on supplies and materials.
Any general contractor fees for supervision of the Ellington Slate Chip Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.